Foolish Thoughts: Foolish Fantasy Football Draft Kit

With most of you hunkering down to conduct your drafts this week, if you haven’t done them already, let me remind you about our handy rankings and strategy recommendations.

2009 Foolish Fantasy Football Draft Kit

Now that our “draft kit” of sorts is out of the way, let’s talk football, shall we?

A Kick and a Prayer

For starts, did you see Chad Ochocinco kicking field goals last week? The fantasy football world will never be the same…

The first time Ochocinco kicks it into a screen at Cowboys Stadium, there’s going to be hell to pay. I can’t believe all the fuss about a television screen. Yes, it can be raised out of the way, so why are we so concerned that it will change the game? The Titan’s punter was gunning for it. That’s my story.

Chad Ochocinco might be better on your fantasy team as a kicker this year. Chris Henry has looked sharp this preseason and was drawing compliments from Carson Palmer in the offseason workouts. For the second straight week, Chris Henry scored a touchdown, even with J.T. O’Sullivan throwing the ball.

There may be better sleepers out there, but Chris Henry is the only Bengals receiver I would want to own on my fantasy team this year. He’s in a contract year, which means he won’t disappoint, and with Palmer looking like he’s one more sack away from sitting out 2009, it’s good to see that Chris Henry can play nice with backup quarterback J.T. O’Sullivan.

Rusty Tom-bone

On the Patriots side of the ball, Tom Brady looked a bit off Thursday night. As I’ve warned in the past, he could be a slow starter this season, and I wouldn’t blow an early pick on him unless you’re in a passing touchdown or quarterback heavy league.

Jag Snag?

Can Troy Williamson be a legit receiver? That’s what the Jaguars are starting to think while Mike Walker is missing time.

Williamson was supposed to replace Randy Moss when Minnesota drafted him. He didn’t. Now he looks like he could be a deep threat. Then again, Williamson might just be putting on a show until the regular season starts so that he can disappear in a cloud of fantasy owner frustration.

I’m interested in what he has to offer this season for the moment, and you can probably look for him as a late-round flier in most drafts or simply keep an eye on him on the waiver wire.

Now About that Hot-lanta Run Game

Anyone who is worried that the Falcons won’t run as much with Michael Turner this season should have watched the Falcons game against the Rams. I’ll give you that it was the Rams, but Turner looked like he was in regular season form.

Contrary to Popular Belief

Willie Parker can still score touchdowns. He proved that this week. Rashard Mendenhall is great and all, but he’s just not spectacular enough to find his way on the field for many snaps this year unless something happens to Parker.

Packing It In?

The new-and-improved Packer defense doesn’t look half bad. Actually, they don’t look even one-third bad. If this continues, I’ll have to look to snag them as a sleeper team defense. They certainly have looked exceptional at causing turnovers in the preseason. The Baltimore Ravens are not too shabby in that category either.

Cutler 1, Neckbeard 0, Denver -1

And, for the record, Jay Cutler looks much better than Kyle Orton. Sorry, Broncos fans, you’ve been ruined this season by the neckbearded left hand bomb.

Fantasy Football Draft Strategy: Cutting Out the Middle Men from Best Player Available

I’ve been a complete subscriber to the “best player available” school of thought when it comes to fantasy football draft strategies, but in 2009, I’d argue in favor of a more enlightened form of drafting a starting roster. Regardless of who you take in the first two rounds of your draft, most fantasy draft strategies boil down to one of two plans: “best player available” or “drafting a starting roster.”

Before we get ahead of ourselves, let me explain the difference.

Best Player Available Strategy

By drafting the most valuable player, regardless of position, this fantasy football draft strategy aims to load a roster full of the most productive fantasy studs possible.

In order to prepare for your draft, you must tier your rankings and cheat sheets in advance. The tiers allow you to see the most productive fantasy studs across all positions and draft accordingly. For example, rather than continuing to draft running backs in the fourth round, you might notice that all the running backs are gone from your top two tiers while three wide receivers in your second tier are still available. These receivers would be more valuable to have at that point in the draft. The schmucks who don’t have their rankings tiered will just keep following their running back rankings down the board while there is a run on running backs and lose value with every pick they make.

Tiering your rankings is fairly simple. Here are the basic steps:

  • First, create your rankings. I often combine many sources into one consensus ranking, much like Fantasy Football Nerd does for you, and then adjust based on my own gut feelings and predictions.
  • Start dividing your rankings into levels, or tiers, by separating starting-quality players from backups. Separate your RB1s from your RB2s and your QB1s from your QB2s.
  • Keep dividing your rankings by position down to the point level, or projected scoring for the 2009 season — players who you expect to produce ungodly point totals each week in the first tier, those who produce five points less in the second tier, 10 points less in the third and so on. The more tiers you can create, the better you’ll be in you draft.
  • When you’re done, layout your draft notes and align the tiers in such a way that you can see your draft tiers across every position in just a glance. The first tier would be one row, and the tiers go down the page from there. When your cheat sheet is compiled, you’re ready to draft.

In theory, this best player available draft strategy ensures that your team is well-rounded, but it doesn’t guarantee you strength at any one position. If the draft follows a certain path, you could end up with strong wide receivers and running backs but an incredibly weak quarterback situation. When there’s a run on running backs early, you could end up with a slew of wide receivers from which you can only start two each week.

As long as you keep balance in mind near the middle and late rounds of the fantasy football draft, you can usually field a solid team with this draft method, but in recent years, I’ve often found myself wishing I had more superstars on my roster. Consistent point totals can only get you so far when you get to the playoffs, and this draft strategy often discourages you from starting the runs on the top tight ends or quarterbacks.

Starting Roster Strategy

Often practiced by fantasy football newbies who don’t know any better, the starting roster method fills every starting position for your Week 1 lineup before drafting any backups. The reasoning is simple: pick the best player to start at every position so that your starting roster is as strong as possible. This method receives plenty of criticism if players go as far as to select a kicker or team defense with their middle-round picks rather than waiting until the final rounds of the draft.

Players employing this strategy are usually the first to draft a quarterback, a defense, a tight end and a kicker. Most of the time, that proves to be a fatal move in their draft because they lose out on depth at running back and wide receiver.

The major flaw in this system is that not all positions are created equal. A starting tight end isn’t worth grabbing over a strong backup wide receiver or running back when there are 10 more tight ends of equal value still available.

The Sleepers Complication

But what if you could take a little from column A and a little from column B?

As a bit of a fantasy veteran at this point in my career, I usually identify several late grabs who could pay off in a big way for me on my fantasy roster. Depending on the experience of my draftmates, and their own sleeper picks, it’s usually possible for me to get a few, if not all, of my guys. While they may not all hit for me, I believe enough in my track record to continue to rely on my sleepers late in drafts, so what’s the harm in betting hard on my fantasy knowledge?

With this all-in thinking applied, I constructed a new draft strategy this season.

The “Cut Out the Middle Men” Draft Strategy

If you know what you are doing, you can adapt the starting roster strategy to your advantage with a little influence from the best player available draft strategy.

  • To begin your draft, pick the best players available — running back, wide receiver or quarterback — in the first two rounds. Select the guys that will produce the most fantasy points early and fill your starting positions with who you believe are the strongest options overall.
  • In the third round, start thinking about your starting lineup. For example, if you already have two stud running backs for your two starting slots at that position, draft a top-tier tight end or quarterback to guarantee that you’ll have elite production across your roster. By breaking away from the best player available strategy and starting the run on these other positions, you reach for your top choices but maximize the chances that you’ll end up with the strongest starters.
  • Once you have all your starting roster spots filled, excluding a kicker and a team defense, begin to draft backups for each position once again basing your picks on the best player available mindset, but lean on your sleepers rather than middle-of-the-road picks. Consistent veterans may be the “best players” on the board, but a sleeper who could quickly become a startable fantasy stud is worth more on your bench since your starting roster is already so strong.
  • In the final two rounds, draft your team defense and kicker. If you have a defense you absolutely love, you could still include them in drafting your starting roster, but I find that most defenses drafted early don’t perform well enough to deserve the pick.

The third point on drafting backups and sleepers could probably use a little more explanation.

Say you have your starting lineup finalized and are now looking at backups. Rather than draft a fantasy backup like Ricky Williams or Fred Taylor, you would look to grab Shonn Greene or Jonathan Stewart. Instead of having a mediocre backup wide receiver like Torry Holt, pass for a few rounds until Chris Henry looks like a reasonable selection.

By the time many backups are being drafted, the players you’re taking won’t be much better than what you can find on the waiver wire throughout the season. While you’re sacrificing depth in loading up on sleepers, you could end up with a stronger roster if many of them pan out for you.

Assuming these guys, sleepers and mediocre starters, are all going to be drafted, you’re loading up your roster with players who have the potential to be top-10 players at their position for the few weeks they may see time on the field rather than reliable players you may never start. If the sleepers pay off, you get to trade them for positions of need or sub them into your lineup. If they don’t, you can easily drop them and await a waiver wire gem midseason.

What’s your draft strategy?

I believe that this “cut out the middle men” fantasy football draft strategy will allow me to compile a more boom or bust roster that should free up some roster positions early in the season and, hopefully, allow me to get more of my top picks on my roster.

My gripe with the best player available method is that you often sit back and never start the runs on any given position during your draft. While that allows you to build great depth on your roster, it doesn’t mean you’ll put together the most points each week since the bench only helps you out in a tie.

I’ll be experimenting with this draft strategy in a few of my final drafts this season.

Would the “cut out the middle men” work for you? What’s your draft strategy this season? As always, the comments are yours.